Introduction:
This high-speed cut-to-length line is able to uncoil & level a coil strip, and then shear the leveled flat strip to certain length of sheets at line speed of max 100m/min. It is referred as coil strip CTL machine in general place. This CTL machine is suitable for thin sheet or thin coil cut-to-length.
The high speed cut-to-length line adopts servo length-fixing and pneumatically mechanical shearing to make sure sheet length precision and clean shearing notch.
The high speed CTL line (coil strip CTL machine) fit steel coils with thickness: (0.2-2mm, 0.3-3mm, 0.6-4mm, or 1-5mm) and changeable width and length of finished sheets depend on customer's practical need.

Advantages and Characteristics of Coil Strip CTL Machine:
1. Fast speed and high precision
Line speed can be up to 100m/min, 25-30pcs/min 2000mm Length sheets in average.
Leveling precision: ±1mm/㎡
Sheet length precision: ±0.5mm/m
Sheet diagonal length precision: ±0.5mm/m

High-Speed Cut-To-Length Line

Detail specification: Model	thickness	width	Length	Leveling speed
MA-2 x 1000	0.2-2.0mm	400-1000mm	adjustable	Max 100m/min
MA-3 x 1250	0.3-3.0mm	500-1250mm	adjustable	Max 100m/min
MA-4 X 1500	0.6-4mm	500-1500mm	adjustable	Max 80m/min
MA-5x1600	1-5mm	500-1600mm	adjustable	Max 80m/min
Note: The data in the form just as reference according to general ranges, we always design and make each line according to each customer’s specific requirements, so each customer can buy his own well-content line from us.